‹
›
Introduction:
Non-ionic polyacrylamide is a water-soluble polymer or polyelectrolyte. Because its molecular chain contains a certain number of polar groups, it can accelerate the settlement of particles in the suspension. It has a very obvious effect of speeding up solution clarification and promoting filtration. It is highly water-soluble and can be completely dissolved in cold water. Adding a small amount of non - ionic polyacrylamide can obtain a great flocculation effect.
Performance characteristics:
1. Flocculation formation and settling fast;
2. Adapted source water PH5.0-14.0;
3. Less corrosive and simple to operate.
Application field:
1.Widely used in the treatment of chemical industrial wastewater and waste liquid, and municipal sewage treatment. Especially when the sewage is acidic, this product is the best choice. It can be used with inorganic flocculant.
2.In the petroleum industry, it has been widely used in the fields of oil recovery, drilling mud, waste mud treatment, water channeling prevention, reducing frictional resistance, enhancing oil recovery, eor, etc.
3.In the textile industry, it is used for textile sizing agents, which can make the properties of the slurry stable, less pulp falling, low breakage rate of the fabric, and smooth cloth surface.
4.Used in the paper industry. First, the retention of fillers and pigments can be improved to reduce the loss of raw materials and environmental pollution; Second, it can improve the strength of the paper (including dry strength and wet strength). In addition, the use of Nonionic Polyacrylamide can also improve paper tearing and porosity to improve visual and printing performance, and can also be used in food and tea wrapping paper.
5.Other industries: it can be used in the production of sugarcane sugar and beet sugar in the food industry. It also can be used in synthetic resin coating, building materials industry, electroplating industry, printing, and dyeing industry.
Specification:
Main Advantages of PAM For Water Treatment:
1 Reduce the amount of flocculant. Under the premise of achieving the same water quality, the combination use of PAM flocculant and other flocculants can greatly reduce the using amount.
2 Improve water quality. In drinking water treatment and industrial wastewater treatment, the use of polyacrylamide powder and other inorganic flocculants can significantly improve water quality.
3 Improve flow strength and settling velocity. The flow formed by polyacrylamide flocculant have high strength and good settling performance and it is beneficial to sludge dewatering.
4 Anti-corrosion and anti-scaling of circulating cooling system. The reduction in the amount of inorganic flocculants can avoid the deposition of inorganic substances on the surface of the equipment, so as to slow down the corrosion and scaling of the equipment.
Product usage:
The dosage is generally 30~50g/ton and the PAM is better be diluted into a 10% content liquid before adding into the water
Package and Storage:
25 kg bag or Ton bag, as customers' requirement. Should be sealed and stored in the dry and ventilated place to prevent from rain, high temperature and strong sunlight
ZB-062 Polyether DefoamerThe product is made of fatty acid ester polyether and synergist, which is suitable for defoaming in a variety of industrial wastewater. In sewage treatment, it will not block the permeable membrane, and no floating oil and other attachments to cause adverse effects.- ZB-061 Silicone Free DefoamerIt meets the requirement that the silicon defoaming agent cannot be used, such as desulfurization and decarbonization system in fertilizer production, refinery delayed coking system, fertilizer anti-blocking agent, water-based ink and other defoaming occasions.
- ZB-060 Organic Silicon DefoamerIt is a kind of defoamer and commonly used in water system. It spreads quickly in the water and easy to use. It has rapid defoaming and foam suppression function in a very wide pH and temperature range, good compatibility with all kinds of additives. It can eliminate foam, and has the effect of preventing foam regeneration.
- ZB-041 Boiler Descaling AgentThis agent is used to remove scale, dirt and other dirt stains, which is generally composed of a variety of components. Industrial descaling agent is mainly used to remove the dirt in the heat exchange equipment and boiler, etc., and household descaling agent is mainly used to remove the dirt in the water dispenser.
- ZB-032 Reverse osmosis detergent (Acid)The stability of reverse osmosis system depends on the level of treatment quality of raw water. But in any case, after a period of operation (generally 3-12 months), the reverse osmosis system will be subject to different levels of pollution, chemical cleaning is a necessary method to restore the membrane performance.
- ZB-030 Non-oxidative BactericideIts bactericidal effect is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes, this bactericide can quickly inhibit their growth, thus leading to death of these microbes. It has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga. In addition, it has many advantages such as high biocidal efficiency, good degradation, no residual and safety.
