‹
›
Introduction:
Copper corrosion inhibitor can be adsorbed on the metal surface to form a very thin film to protect copper and other metals from corrosion of circulation water and harmful media. The corrosion inhibition effect of our product is good and has very strong scale inhibition.
Product usage:
1. This product is mainly used in circulating cooling water system, Especially used for copper and copper alloy circulating water pipeline, such as power plant, chemical plant, petrochemical, steel and other circulating cooling water system.
2. It can be used with a variety of scale inhibitors and bactericidal killer in the circulating cooling water system, which has good corrosion suppression effect on the circulating cooling water system.
3. It can also be used as copper and silver anti-discoloration agent, automobile coolant, lubricating oil additive.
Specification:
How to use:
1. Add the corrosion and scale inhibitor required every day into the plastic dosing bucket (or box);
2. For the convenience of use, the agent can be diluted with water, and then add at the entrance of the circulating pump (i. e. at the outlet of the collecting pool) by the metering pump or the regulating valve door;
3. The concentration of dosing is generally 10-150mg/L (measured by supplementary water). The specific dosage is determined according to the water quality of the site.
The corrosion and scale inhibitor is weakly acidic, please pay attention to labor protection during operation. It should avoid direct contact with the skin, eyes, etc., once contact, need to rinse with a lot of water.
Package and Storage:
25 Kg / plastic barrel or IBC(1000L), customers' requirement.
Storage for 12 months in shady room and dry place.
ZB-062 Polyether DefoamerThe product is made of fatty acid ester polyether and synergist, which is suitable for defoaming in a variety of industrial wastewater. In sewage treatment, it will not block the permeable membrane, and no floating oil and other attachments to cause adverse effects.- ZB-061 Silicone Free DefoamerIt meets the requirement that the silicon defoaming agent cannot be used, such as desulfurization and decarbonization system in fertilizer production, refinery delayed coking system, fertilizer anti-blocking agent, water-based ink and other defoaming occasions.
- ZB-060 Organic Silicon DefoamerIt is a kind of defoamer and commonly used in water system. It spreads quickly in the water and easy to use. It has rapid defoaming and foam suppression function in a very wide pH and temperature range, good compatibility with all kinds of additives. It can eliminate foam, and has the effect of preventing foam regeneration.
- ZB-041 Boiler Descaling AgentThis agent is used to remove scale, dirt and other dirt stains, which is generally composed of a variety of components. Industrial descaling agent is mainly used to remove the dirt in the heat exchange equipment and boiler, etc., and household descaling agent is mainly used to remove the dirt in the water dispenser.
- ZB-032 Reverse osmosis detergent (Acid)The stability of reverse osmosis system depends on the level of treatment quality of raw water. But in any case, after a period of operation (generally 3-12 months), the reverse osmosis system will be subject to different levels of pollution, chemical cleaning is a necessary method to restore the membrane performance.
- ZB-030 Non-oxidative BactericideIts bactericidal effect is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes, this bactericide can quickly inhibit their growth, thus leading to death of these microbes. It has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga. In addition, it has many advantages such as high biocidal efficiency, good degradation, no residual and safety.
